Barrier Gate Controller Remote Learning Tutorial

道闸主板遥控器学习教程

Barrier Gate Controller Remote Learning Tutorial

1. 长按菜单按钮，屏幕显示L-01
   Press and hold the Menu button until the screen displays L-01.
2. 按关闭按钮和+号按钮，调整到L-15
   Press the Close button and the + button to adjust to L-15.
3. 单击菜单按钮，屏幕显示0000
   Press the Menu button once, and the screen will display 0000.
4. 说明进入了学习状态。
   This indicates that the controller has entered learning mode.
5. 拿出遥控器，按下遥控器的开启按钮。
   Take out the remote control and press the “ON” button.
6. 屏幕会闪烁显示L-15，表示学习成功。
   The screen will blink displaying L-15, indicating successful learning.
7. 点击确认按钮，退出设置。
   Press the Confirm button to exit the settings.
8. 就完成设置了。
   The setup is now complete.
9. Each motherboard can learn 50 remotes. It is also possible to set the remotes to the same code. Then there is no limit.